IOT online Dimmable Household’s LED lamps (power LED 110[v] - 10[Watt])

2017 ELE Engineering Design Project (FM06)

---

Faculty Lab Coordinator

Farah Mohammadi

Topic Category

Power / Controls

Preamble

There are a lot of benefits to reduce light of the Household's LED lamps, for example Reduce the amount of light when there is sunlight (to minimize energy consumption). A modern solution to manage the energy consumption by any household’s LED lamps is real-time monitoring and control of lighting by dimming in the buildings from anywhere in the world with mobile or web apps. Therefore, designing a system by which one can monitor/control home’s light at different locations is desirable by using a wireless communicating system.

Objective

To Develop online Dimmable Household’s LED lamps , we need one access point/Station and a website that show the amount of light in the house and one Hardware to decrease/increase the light of the Household's LED lamps . 1- Station/ Access point can be WiFi system like ESP8266 2- website is written in BOOTSTRAP and store home light to Database 3- a GUI in the website side due to show home light and control that 4- a hardware to measure the amount of light in the house and dimming the Household's LED lamps.

Partial Specifications

These modules to be implemented:
- data acquisition,
- real-time programming via wireless technologies,
- local website development
- Verify the developed hardware - ESP8266 as WiFi Devices and on board
Microprocessor that measure the amount of light in the house and dimming the Household's LED lamps.
- Verify the developed local website
- Verify the developed Dimmable Household’s LED lamps hardware .

Suggested Approach

1- Develop web site by Programming in BOOTSTRAP
2- Develop Dimmable Household’s LED lamps .
3- Develop a Hardware as Access point & Station ( connect to home router)
4-Study how to use ESP8266 as a station & Access point

Group Responsibilities

- Investigating available Dimmable Household’s LED lamps in home automation - one student will be working on networking by using ESP8266. A second student will concentrate on developing Dimmable Household’s LED lamps . A third student will concentrate on programming aspect for local website. -Prepare a technical report and present the results at the end of the program

Student A Responsibilities

Investigation of available Dimmable lamps in home automation - Acquiring data from light sensor . - working on networking by using ESP8266

Student B Responsibilities

Design and Development a Hardware to measure the amount of light in the house and dimming the Household's LED lamps.

Student C Responsibilities

Design and Development of the local website

Course Co-requisites

Communication Systems, Programming in C, BOOTSTRAP